Introduction
The Restraints of Trade Act 1976 (NSW) (‘the Act’) provides New South Wales with a statutory framework for restraints of trade, including restraint clauses in employment contracts. Under Section 4(1), a restraint is valid only to the extent that it is not against public policy, so the Act does not give employers an automatic right to enforce every clause.
That distinction matters when a former employee may work for a competing business or use confidential information connected with the employer’s legitimate interest. This article explains when the Act applies, how NSW differs from the common law approach elsewhere in Australia, and how Section 4(1) and Section 4(3) affect the enforceability of an unreasonable restraint.
Interactive Tool: See If Your Restraint Clause Is Enforceable
NSW Restraint of Trade Clause Validity Checker
Quickly check if your employment restraint clause is likely to be enforceable under the Restraints of Trade Act 1976 (NSW).
What is the main purpose of your restraint clause?
How broad is the scope of your restraint?
Was the clause tailored to the employee’s actual role and access to sensitive information?
✅ Likely Enforceable (Meets Key Requirements)
Get Restraint of Trade Legal Advice⚠️ Partially Valid, But May Be Too Broad
Speak to a Lawyer About Clause Drafting❌ Unlikely to Be Enforceable (Fails Key Tests)
Speak to a Restraint of Trade Lawyer Now⚖️ Court May Read Down or Invalidate Clause
Get a Legal Review of Your ClauseUnderstanding When the Act Applies & How NSW Differs for Employers
When Does the Act Apply?
Section 3 of the Act addresses when the legislation applies. The Act covers a restraint of trade that’s created in a few ways, including:
- by contract
- by the rules of an association
- through another method
A restraint in an employment contract may therefore fall within its scope, because the employment agreement is itself a contract.
An employer’s business location alone doesn’t establish that the Act applies. You also need to consider the relevant restraint, the way it was created, the circumstances surrounding it, and any other applicable legal framework.
Section 3 also provides that the legislation applies despite a contrary contractual term, and doesn’t affect certain other enactments concerning the validity of restraints.
How Is the NSW Approach Different From Other States?
NSW takes a different approach from most Australian jurisdictions because the Act allows a restraint to remain effective to the extent that it isn’t against public policy. In practical terms, this can give a NSW court more flexibility to limit an overly broad restraint rather than treating the whole clause as ineffective.
Employers shouldn’t treat that flexibility as a safety net for poor drafting, however. The restraint still needs to reflect the employee’s role, the business interest being protected and the level of restriction genuinely required.
Section 4(1) Affect Restraint Clauses & Public Policy for Businesses
How Does Section 4(1) Affect Restraint Clauses?
Section 4(1) of the Act changes the common law starting point described above: a restraint is valid only to the extent it isn’t against public policy. For an employer, that wording doesn’t create an automatic right to enforce a non-compete or other restraint clause. The court still examines:
- the agreement;
- the employee’s role;
- the legitimate interest being protected; and
- whether the restriction is reasonably necessary for that protection.
Restraints Can Be Valid in Part
A restraint doesn’t have to be treated as entirely valid or entirely unenforceable. As described above, Section 4(1) lets the restraint operate to the extent it isn’t against public policy, even where its terms aren’t severable.
That approach may allow reasonable components of a clause to remain effective while broader components do not. For example, an employment agreement might contain restrictions covering different periods, activities or geographic areas. The outcome may depend on which parts can operate consistently with public policy and the applicable legal principles.
The Act Does Not Make Every Restraint Enforceable
The Act doesn’t make every restraint of trade clause enforceable. An employer still needs to identify a legitimate business interest, such as:
- confidential information;
- trade secrets;
- client connections; or
- goodwill.
Rather than relying on a restraint solely to prevent competition, the restriction should be linked to protecting that interest. A clause that goes further than reasonably necessary to protect it may be unenforceable. For example, a non-compete that prevents a former employee from using their general skills, earning a living or working across an entire industry may be difficult to justify.
When Is a Restraint Against Public Policy?
Section 2(1) of the Act defines public policy as public policy in respect of restraint of trade. Section 4(1) uses that concept as the limit on the extent to which a restraint remains valid.
The assessment connects the statutory framework with common law principles of reasonableness. A court may consider:
- whether the clause protects a legitimate interest;
- whether its reach is reasonably necessary; and
- whether it places an excessive burden on the employee or the public interest in competition.
Legitimate Business Interests + Reasonableness
A restraint should be tied to a genuine business interest, such as confidential information, trade secrets, goodwill or important client relationships. The restriction should then match the particular employee and the risk associated with their departure.
For example, a senior employee who controls major client relationships and has access to pricing strategies or sensitive commercial information may justify stronger restrictions than a junior employee with little client contact or access to confidential material. Using the same restraint for both employees may make it harder to show that the restriction was reasonably necessary.
Employee & Public Interests
A restraint cannot place an excessive burden on a former employee’s ability to earn a living or use their general skills and experience. Confidential information and business relationships may be protected, but an employer cannot use a restraint clause to prevent a person from working in their established occupation without a sufficient legitimate interest.
The public interest in competition also forms part of the assessment. A restraint that limits a former employee’s ability to join a competing business must be balanced against the employer’s need to protect legitimate business interests. The wording and circumstances of the employment agreement remain important.
Understanding Court Powers Under Section 4(3) & Rewriting Clauses for Employers
What Can the Court Do Under Section 4(3)?
Under Section 4(3) of the Act, the Supreme Court may make an order about a restraint of trade that is against public policy in its application to the person restrained. The Court may declare the restraint altogether invalid, or allow it to remain valid only to a specified extent.
The Court must also consider the circumstances in which the restraint was created. Any order may operate on terms the Court considers appropriate.
When Section 4(3) Applies
Section 4(3) applies when the person subject to the restraint makes an application to the Supreme Court. The Court must be satisfied that the restraint is against public policy to some extent in its application to that person.
The provision isn’t triggered simply because an employer has drafted a broad restraint clause. The person restrained must apply to the Court, and the statutory conditions must be met.
The “Manifest Failure” Requirement
The person applying under Section 4(3) must establish that the restraint was against public policy because, at least partly, the person who created or helped create it manifestly failed to attempt to make it reasonable.
A manifest failure involves more than a restraint being difficult to enforce. The focus is on whether the creator of the restraint made a clear failure to attempt reasonable drafting, having regard to the circumstances in which the agreement was made.
Orders the Court Can Make
Section 4(3) gives the Supreme Court two main options. The Court may:
- declare the restraint altogether invalid; or
- declare it valid only to an extent that does not exceed the part that is not against public policy.
The Court may impose terms when making the order and specify the date from which it takes effect. That date cannot be earlier than the date on which the order was made. An order under Section 4(3) doesn’t affect rights, including rights to damages, that arose before the order took effect.
Can NSW Courts Rewrite Restraint Clauses?
NSW courts can, in appropriate circumstances, limit the operation of a restraint so that it applies only to the extent permitted by the Act. That doesn’t give the Court an unrestricted power to redesign an employment contract for the parties.
The result will depend on the wording of the clause, the circumstances in which it was agreed and the business interest being protected. Employers should therefore avoid drafting an unnecessarily broad restraint on the assumption that a court will later correct it.
The Limits of the Court’s Powers
The powers under Section 4(3) do not give the Supreme Court a general power to rewrite an unreasonable employment contract from scratch. Any order must remain within the extent to which the restraint is not against public policy.
A court may narrow the scope of a clause, but the outcome cannot exceed what the Act permits. Your business shouldn’t assume that a court will create a new restraint covering different activities, employees or interests.
Why Employers Should Not Rely on the Court to Fix Poor Drafting
Before relying on a restraint, ask whether you can clearly explain what business risk the clause is intended to address. Does the employee manage important clients? Do they have access to genuinely confidential commercial information? Could their departure expose valuable goodwill or workforce relationships?
The restraint should be built around those risks. A standard clause copied across every employment contract may be difficult to justify where employees have very different roles, responsibilities and levels of access.
Commercial Consequences & How the Act Applies in a Restraint Dispute
How Does the Act Apply in a Restraint Dispute?
A dispute may begin when a former employee resigns and the employer believes they’ve breached a restraint of trade clause, such as by working for a competing business or approaching clients. The parties may disagree about the clause’s scope, whether it’s enforceable, and whether the alleged conduct threatens a legitimate interest.
The employer may seek an injunction, which is a court order preventing the former employee from engaging in the restricted activity. The court will assess:
- the wording of the restraint;
- the circumstances of the employment agreement; and
- the applicable legal principles under the Act.
A claim for damages may also be available for losses caused by a breach of contract.
The Commercial Consequences of Getting Restraints Wrong
An ineffective restraint can leave a business exposed at the point when protection matters most. A key employee may already have joined a competitor, contacted important clients or taken knowledge of sensitive business information with them.
If the restraint is too broad or poorly matched to the employee’s role, the employer may spend substantial time and legal costs seeking protection without obtaining the outcome it expected. Poor drafting can also weaken the business’s position when negotiating with a departing employee before litigation begins.
What Does the Act Mean for NSW Employers?
Identify the Business Interest Being Protected
Start with the risk rather than the restraint. Identify what could realistically be harmed if the employee leaves: confidential information, important client relationships, trade secrets, business know-how or goodwill.
Once that risk is clear, the contract can be drafted around the type of conduct that actually threatens it. This usually produces a more defensible restraint than beginning with a broad non-compete and trying to justify it later.
Tailor the Restraint to the Employee’s Role
A restraint clause should reflect the employee’s actual duties, seniority, access to sensitive information and relationships with clients, so tailored advice from restraint of trade lawyers in Sydney may help assess whether it is appropriate.
A standard clause used for every employee may not match the interest the business needs to protect and may be unenforceable.
As noted above, an employee with access to trade secrets, pricing data and important client connections may need different restrictions from a junior employee without that access. The Act doesn’t remove the need for the employer to use wording that fits the employment relationship.
Review Restraints When Roles Change
A restraint that made sense when an employee joined the business may no longer reflect their position several years later. Promotions, new client responsibilities or increased access to sensitive information can materially change the risk associated with their departure.
Employers should therefore review restraint clauses when an employee’s role changes significantly, rather than waiting until the employment relationship ends to discover that the existing wording no longer fits the position.
Conclusion
The Act creates a distinct framework in which a restraint may remain valid to the extent it isn’t against public policy. Section 4(1) and Section 4(3) give the Supreme Court flexibility to limit or invalidate a restraint, but they don’t make an unnecessarily broad clause enforceable.
For employers reviewing an employment contract or restraint clause, careful drafting remains important because the Court won’t simply repair every unreasonable restriction. Contact the restraint of trade lawyers in Sydney at Connected Legal + Commercial to request advice on whether your clause protects a legitimate interest, is reasonably necessary, and fits the employee’s role and agreement.
Disclaimer: This article is general information only and does not constitute legal advice. You should seek advice tailored to your circumstances before acting on it.